When you’re out on your motorcycle, you must be proactive and do everything you possibly can to keep yourself safe. The very first thing you must do is make sure that your ability to see is not jeopardized at any time. Of course, if your helmet visor keeps fogging up, this can be quite difficult.
When you’re riding after dark or in cold weather, the problem of your helmet visor fogging up is much greater. Below, we will look at some reasons why this keeps happening and what you can do about it.
Causes of helmet visor fogging
The problem is, the external temperature of your visor is lowered due to cold air and/or rain. This causes the moisture from your breath to condense on the surface of the inside- which causes it to fog up.
How to prevent your helmet visor from fogging up
The good news is, there is a variety of ways that you can prevent this from happening to you. These solutions will combat the problem of condensation in at least one of the following ways:
Ventilation
By increasing ventilation through your Motorcycle Helmetz or directing the ventilation so that the air you exhale is taken away, you will ensure that your visor will remain clear. This is the reason why this is a bigger problem when you’re not speeding along the highway on your motorcycle.
Temperature
If you can find a way to maintain the temperature on the surface of your visor, you can avoid moisture condensation and fogging up.
Repel water
Finally, try to figure out how you can repel water way from your visor to prevent it from fogging up.
Best solutions for keeping your helmet visor from fogging up
Now that you know what is causing your visor to get foggy, let’s take a look at some ways that you can keep this from happening.
Open your visor
While this may sound pretty obvious, the truth is that not everyone is exactly sure how this works. By opening your helmet visor, you ensure that when you exhale, the air is directed outside of your helmet. Since you’re going to be riding fairly fast—at least in comparison to the rate at which you are breathing—it makes sense that the increase in ventilation will prevent the air from inside the helmet from hitting the visor directly.
Of course, if it’s raining or you’re riding at high speeds, this can be difficult to do. Most helmets have a notched visor, so you can open it slightly. This is a great compromise to keep the wind and rain off your face for the most part, but also to increase ventilation so that your breath doesn’t fog it up.
If your visor is not notched, you might want to tie a cable around the chin area of your helmet to hold the visor open slightly. This allows enough air to get in to prevent the fog. The only issue to propping your visor open slightly is that some rain may still get in, which will make it difficult for you to see clearly.
Open the vents
Some helmets have vents in them, which you can use to combat the problem of the visor fogging up. Simply open the vents to increase ventilation, especially those around your chin; this helps to direct the air you breathe out away from your visor. You might also want to see if it’s possible to remove the lower chin skirt piece so that your breath is directed out of the helmet instead of being kept inside.
If you own a helmet that contains a nose guard, you can use that to direct the air you breathe out down and away from your visor. In addition, try adjusting any neck buffs that are keeping your breath from exiting the helmet. This will improve the flow of air through your helmet and keep your visor clear from condensation.
Anti-fog treatments/water repellents
Finally, you might consider investing in products that will repel water and apply them to your helmet and visor. This will allow you to continue riding without facing the problem of visor fog.
So, there you go—a few tips that you can easily put into action to keep your helmet visor from fogging up. While it’s true that you may have to invest in some additional products, they are worth it to help keep your visor from fogging up so that you can see better, ride safe, and get from point A to point B in one piece.
The sooner you figure out how to prevent moisture and fog accumulating on your helmet visor, the more you will be able to enjoy riding your motorcycle.